Foam sheet products are available in 4'x8' and most sizes in 2'x8' as well as 22 1/2" x 96" and custom as needed.
Our stock foam available: (custom thickness can be ordered, 2 weeks to deliver. Custom width cutting of stock, 24 hours)
-A-Plex Roof, Wall, & Floor assemblies
-ATTIC and CATHEDRAL CEILINGS
-EXTERIOR / INTERIOR FOUNDATION WALL
-ABOVE / BELOW CONCRETE SLAB
-FROST WALLS
-RADIANT FLOOR HEATING
-SNOW MELT AND DE-ICING
-HOT WATER TANK WRAP (1/2" thick only)
Our stock foam available: (custom thickness can be ordered, 2 weeks to deliver. Custom width cutting of stock, 24 hours)
- Graphite EPS 0.7 Thickness 1.75", 3.5", 5.5" HIGH INSULATION R-Value rating at -18C is R5.4/inch
Use multiple layers of the thicknesses above to create a range of choices. - EPS Type 2 HD Envirosheet
Thickness 2". For more thickness apply multiple layers staggered to avoid edge gaps. The thinness of 2" also plies over variations better with less cracking when walked on. COMMON use for Type 2 is under-concrete foam insulation. - SilveRboard 2.5
STOCK SIZES 4x8, 4x10, 2x8, 2x10
STOCK Thickness: 1/2", 3/4". Up to 6" thick available -special order
NOTE: Our stock SilveRboard is non- perforated certified vapour and air barrier with edge taping using an approved tape.
-A-Plex Roof, Wall, & Floor assemblies
-ATTIC and CATHEDRAL CEILINGS
-EXTERIOR / INTERIOR FOUNDATION WALL
-ABOVE / BELOW CONCRETE SLAB
-FROST WALLS
-RADIANT FLOOR HEATING
-SNOW MELT AND DE-ICING
-HOT WATER TANK WRAP (1/2" thick only)
The very same SilveRboard that we use in our A-Plex wall as vapour barrier is also sold as an acoustic board. In our A-Plex wall application the silveRboard is inserted in the wall with zero fasteners puncturing and vapour tape joining edges and caulking at edges to the panel. Having no fasteners in the A-Plex SilveRboard makes it that much better of a sound deadening wall system.
Crawl space walls of concrete only would do very well with SilveRboard against them inside combined with our SPF Spray Foam Polyurethane closing in the joist rim boards and down to the top of the SilveRboard. We stock SilveRboard Non-perforated 1/2" x 4' x 8' & 10' and 3/4" x 4 x10'. For more information on SilveRboard visit www.amvicsystem.com/products/thermal-acoustic-insulation/silverboard-acoustic/
Crawl space walls of concrete only would do very well with SilveRboard against them inside combined with our SPF Spray Foam Polyurethane closing in the joist rim boards and down to the top of the SilveRboard. We stock SilveRboard Non-perforated 1/2" x 4' x 8' & 10' and 3/4" x 4 x10'. For more information on SilveRboard visit www.amvicsystem.com/products/thermal-acoustic-insulation/silverboard-acoustic/